Lookah Load Cart Battery Not Working?

  • March 14 | Jeremy Lin

load lookah not working how to fix?

Tip 1 for load lookah not working:

The center contact point on the 510 thread may be pushed in too far and not making electric connection. You can try to pull out the center titty a little and it may fix your problem. You had to slightly pull up on the middle of the connector that connects to the cart. Probably screwed it in too tight or pushed it down while cleaning it. Be careful not to pop it all the way out though.

Tip 2 for load lookah not working

This can be done by using a hair dryer or by placing the cart in an airtight bag and submerging it in warm water.

Tip 3 for load lookah not working

Please check the thread on the device, and the cartridge is clean and making a good connection. The LOAD will auto-turn off after 60 minutes of not being used.

Do you know how to choose lookah seahorse pro coil?

  • March 14 | Jeremy Lin

Do you know how to choose lookah seahorse pro coil? If not, go on read this lookah seahorse pro coil guideline, and further question, please drop a comment below.

Lookah Seahorse Coil V

Made to fit and work with the full Seahorse vape pen range these 510 coils have a transparent tube that showcases the vapor.

Lookah Seahorse Coil Ⅱ- Ceramic Dab Tips
Lookah Seahorse Coil-Ⅱ is a new design wax dab pen coil with double ceramic coils at the tip.

Lookah Seahorse Coils 1
Lookah Seahorse and Lookah Seahorse Pro tips. These 510 coils offer the richest flavor when dabbing wax and concentrate with your Lookah dab pen.

Discover the Lookah Seahorse Replacement Coils, featuring a 1.2ohm resistance, quartz or ceramic tip, and is 510 threaded for the Seahorse Vaporizer.

Why does the Yocan UNI Pro hit more potently halfway through?

  • March 10 | Jeremy Lin

Why does the Yocan UNI Pro hit more potently halfway through?

Q: I’ve noticed that my new carts on Yocan UNI Pro don’t seem to hit as strong at first, but they get more potent halfway through. The carts start smooth but clog around 75%. After clearing a clog, they hit much harder. Is this normal? I use HHC distillate/CBG isolate blend in ceramic 510 carts. Am I vaping at too low power?

A: It’s possible the blend might not have been distributed perfectly within the cartridge. The initial third you vaped could have contained mostly CBG isolate, known for its subtler effects. The remaining oil, concentrated at the bottom after clogging, could be richer in HHC distillate, delivering a stronger psychoactive effect.

In simpler terms: Your cartridge might have uneven concentration. The part you vaped first could have been mostly CBG, which is less potent. The thicker oil left behind after clogging could be more concentrated with HHC, giving a stronger feeling.

Badder, Batter, and Budder: Definitions and Advantages

  • March 10 | Jeremy Lin

Badder, Batter, and Budder: Definitions and Advantages
Badder, batter, and budder are all types of cannabis wax, but they have different textures and consistencies.

Badder has a loose, “saucy” consistency that is easy to work with and dab. It is often described as having a “whipped” texture, similar to cake batter. Badder is typically made using a hydrocarbon extraction process.

Batter is similar to badder, but it has a slightly thicker, more “doughy” consistency. It is also easy to work with and dab, and it is often made using a hydrocarbon extraction process.

Budder has a smooth, creamy texture that is similar to butter. It is more solid than badder or batter, and it can be difficult to work with at room temperature. However, it is easy to melt and dab, and it is known for its smooth, flavorful vapor. Budder is typically made using a solventless extraction process, such as rosin pressing.

Advantages of Badder, Batter, and Budder:

Potency: Badder, batter, and budder are all highly potent forms of cannabis, with THC levels that can range from 60% to 90%.
Flavor: These waxes offer a wide range of flavors, from fruity and sweet to earthy and pungent.
Effects: The effects of badder, batter, and budder can vary depending on the strain of cannabis used to make them. However, they generally produce a strong, long-lasting high.
Convenience: These waxes are easy to transport and store, and they can be consumed in a variety of ways, such as dabbing, vaping, or adding them to food.

Unveiling the Lookah Bear Battery: Compact Powerhouse for Your Vaping Needs

  • March 6 | Jeremy Lin

The Lookah Bear battery, a trendy and user-friendly vape pen battery that’s perfect for anyone who enjoys vaping. Related post: Lookah Bear Blinking Yellow 5 times

In the world of vaping, the Lookah Bear Battery stands out as a compact yet powerful companion for enthusiasts. At first glance, its diminutive size might deceive you, but hidden within its sleek design lies a robust 500mAh battery capacity. This capacity ensures that you can enjoy uninterrupted vaping sessions throughout your day without worrying about running out of power.

One of the standout features of the Lookah Bear Battery is its USB Type C charging port. This modern charging interface not only ensures faster charging times but also adds convenience to your vaping experience. Whether you’re at home, in the office, or on the go, you can easily recharge your device with any compatible charger, eliminating the hassle of carrying multiple cables.

Moreover, the inclusion of four battery indicator lights at the back of its head is a thoughtful addition by Lookah. These lights provide a clear visual representation of the battery level, allowing you to monitor its status at a glance. Gone are the days of guessing how much charge is left or unexpectedly finding yourself with a dead battery mid-day.

The Bear comes in various colors, including gray, blue, green, purple, aqua, cyan, pink, red, and orange, so you can choose the perfect color to match your needs.

With the Lookah Bear Battery, convenience, portability, and performance converge seamlessly. Whether you’re a seasoned vaper or just starting your journey, this compact powerhouse is sure to elevate your vaping experience. Say goodbye to bulky batteries and hello to sleek efficiency with the Lookah Bear Battery by your side.

What does 5 10 thread mean?

  • January 22 | Jeremy Lin

The vapes consist of two components, the cartridge and the battery, and connect via a screw thread. 510 is the technical term for the connecting thread style. If you want to get precise, ten connecting threads space five millimetres apart, which is why it’s called a ‘510’ cartridge or battery. 510 thread is the most often used connection type for vape cartridges. The number “510” indicates that there are 10 threads, each measuring 0.5 mm.

What does 5 10 thread mean?
“510” refers to the screw threads on the battery that the cannabis oil cartridges can screw onto. It’s 10 threads at 5mm. This type of threaded connection quickly the standard for most cannabis vape pens and e-cigs, which make it easier to use different cartridges and pens as you like.

Pulsar Payout 2.0 510 Cartridge Vape Battery Review

  • December 7 | Jeremy Lin
UNBOXING & REVIEW Pulsar 510 Payout 2.0 Vape Cartridge Battery – BoyYouTrippinG Tv

Pulsal 510 battery Features & Specs

Pulsar 510 Payout 2.0 Vape Cartridge Battery Tech Specs:
400mAh.
Variable voltage range (1.8-4.2V)
Universal 510 threading.
LED display screen.
Cartridge connection indicator.
Puff counter.
15 second preheat function (1.8V)
5 minute automatic shut-off.

The Pulsar Payout 2.0 features universal 510 threading, making it compatible with most standard-sized vape cartridges. But that’s not all – we’ve got your back even with oversized oil cartridges. The included collar adapter ensures that no opportunity is missed, no cartridge is left behind.

The Pulsar Payout 2.0 is the ideal device for users looking for a reliable, portable battery.

How To Use Pulsar Payout 2.0?

Connect the Payout 2.0 to the USB-C charge cable and to a power source. Fully charge the device before use, approximately 1.5 hours. Disconnect from the power source before using.
Click the power button 5 times to turn on. (If you click it once, the Payout 2.0 will remind you to click 5 times to turn it on)
Screw in your 510-threaded cartridge, until the display indicates that the cartridge is successfully attached. If using a wider cartridge, first screw in the collar adapter, then insert the cartridge.
Click the power button twice to activate the pre-heat function (1.8V for 15 seconds).
Use the PLUS PULSAR 510 Payout 2 0 Cartridge Battery – icon 1 or MINUS PULSAR 510 Payout 2 0 Cartridge Battery – icon 2 buttons to set your preferred voltage, between 1.8 and 4.2V.
Hold down the power button to fire the vape, for up to 15 seconds at a time, and draw from the cartridge mouthpiece. After 15 seconds, the battery will stop firing. Repeat as desired.
After use, click the power button 5 times to turn off and extend the life of your battery. The Payout 2.0 will turn off automatically after 5 minutes of inactivity.
♠ Puff Counter: The puff counter will go up every time you fire the vape, (even if you take multiple puffs). Using the pre-heat function does not activate the puff counter. To reset the puff counter, hold down the PLUS and MINUS buttons simultaneously.
♠ Battery Level Indicator: While charging, the OLED screen will display the battery level. If charging while off, the battery square will flash to show the current level and the screen will automatically shut off after 5 seconds. To check the battery level, simply press the power button.
♠ Lanyard: Attach the included lanyard using the lanyard hole, and take your Payout 2.0 almost anywhere!

DynaVap 101: Mastering Your M Plus for Maximum Flavor and Fun

  • December 5 | Jeremy Lin

The DynaVap M Plus is a legendary vaporizer for a reason. It’s portable, powerful, and delivers smooth, flavorful hits. But mastering this little beast takes a bit of know-how. Fear not, fellow vaporents! This guide will walk you through the essential steps, from deciphering those clicks to torching your herb to perfection. Here is a video about Dynavap 101:

Listen to the Clicks: Your DynaVap’s Secret Language

The clicks are your DynaVap’s way of telling you what’s up. Pay close attention, or risk burning your precious herb.

  • First Click: Time to puff! The M Plus is at peak vaping temperature. Don’t keep heating – one click is all it takes.
  • Second Click: Cool down time. The M Plus has dropped below vaping temperature. Wait for this click before reheating, or you’ll be saying goodbye to tasty vapor.

Mastering the Torch: Your M Plus’s Power Source

Torch lighters are your M Plus’s best friend. Sure, other heat sources work, but they’re slow and won’t unlock the full potential of your vape.

  • Single Flame for Control: Prefer a slow, even heat-up? A single flame offers precise control, perfect for savoring the nuances of your herb.
  • Multiple Flames for Speed: Need faster heat times? Go for a double, triple, or even quad flame torch. Just remember, with great power comes great responsibility (don’t torch your herb!).

Filling Your Torch: Don’t let a cold M Plus hold you back!

  1. Flip your torch upside down.
  2. Press your butane tank firmly into the filling hole for 4-5 seconds. Stop when the filling stops.
  3. Hold the torch for 30 seconds to let it reach room temperature.
  4. Adjust the flame to its lowest setting without flickering.

Grind It Up: Consistency is Key

Your M Plus is a versatile beast, handling most grinds with ease. But there are some things to keep in mind:

  • Too fine? It might pass through the screen, leaving you with a not-so-pleasant surprise.
  • Too chunky? You might need to stir it mid-session for even heating.

A two- or four-piece grinder is usually your best bet.

Packing Your M Plus: It’s All About the Herb

  1. Remove the cap and fill the chamber to the brim with your ground-up goodness.
  2. Use a small scoop or the tip itself to pack it in gently. Don’t overpack, or you’ll restrict airflow.
  3. Tamp it lightly to settle the herbs, then pop the cap back on. You’re ready to roll!

Heating Up Your M Plus: The Dance of Fire and Herb

This is where the magic happens! Grab your M Plus and torch lighter:

  1. Turn on the torch and hold the cap in the blue halo of the flame – that’s where it’s hottest.
  2. Rotate the M Plus slowly, like an herb rotisserie, for even heating. Don’t point the flame directly at the tip, you want to kiss the sides.
  3. Aim the flame at a 45-degree angle, starting from the base and moving towards the mouthpiece.

You’re in Control: Finding Your Perfect Temperature

Remember, you control the temperature! Move the flame closer or further away from the tip to find your sweet spot:

  • Cooler vapor? Keep the flame further out for gentle, flavorful hits.
  • Warmer vapor? Bring the flame closer to the mouthpiece for denser clouds.

Hitting It Just Right: Inhaling the Flavor

Once you hear that click, it’s time to puff! Put the mouthpiece to your lips and take a slow, steady draw.

  • Feeling overwhelmed? Feather the airport with your finger to control the airflow. More covered = thicker hits, less covered = airier draws. Adjust throughout your hit to find your perfect flow.

Cool Down and Repeat: Savoring Your Sessions

Wait for that second click before diving back in. Patience is a virtue, especially with your M Plus.

  • Ready for another hit? Fire it up again!
  • Need a break? Leave it be until you’re ready.
  • Want to unload? Let it cool completely, then gently tap out the spent herbs.

DynaVap Mastery: It’s a Journey, Not a Destination

Experiment, have fun, and don’t be afraid to get creative! The DynaVap M Plus is yours to explore. With these tips and a little practice.

SKE Crystal Plus review – Gary Vapes

  • December 5 | Jeremy Lin

The new SKE Crystal Plus Airflow Adjustment Edition features a button on the base of the device to allow consumers to set the airflow to their own preferences.

How long does the Ske Crystal Plus last?
around three to four days
This system makes the SKE Crystal Plus much more environmentally-friendly (and cost-effective) than disposables. Each pod contains 2 millilitres of e liquid and gives you up to 600 puffs. For an average vaper, this is enough to last around three to four days.

The Crystal Plus pod kit is a compact device that looks, feels and vapes like an SKE Crystal Bar disposable vape. The battery can be recharged and works with SKE Crystal Plus prefilled pods that are available in a variety of 15 popular flavours (pods sold separately).


SKE Crystal Plus review – Gary Vapes