Do you have similar vape experience? After vaping your device few sessions, the vapour produce become smaller and samller. If your Yocan device has restricted airflow, try to follow below vape tricks to clean and declog it.
Unscrew All Parts First of all, unscrew all parts, seperate the following Yocan Evolve Plus XL components: Mouthpiece QUAD Coil Coil cap Base part
What you’d want to do is to remove and separate the all parts from the XL battery, in this case, you have to twist the threaded connections to take off the all parts from the vaporizer itself.
Soak in ISO, And Wipe It Excluding the Silicone Jar, and the Evolve Plus Xl battery, soak the above parts in Isopropyl Alcohol for at least one hour. Then remove and wipe down all surfaces with cotton swabs. Here is detail vape tricks:
Step 1 – Place the parts in a Sealable Plastic Bag with Alcohol. Step 2 – Add a Teaspoon of Salt. (Option) Step 3 – Let the parts Soak. Step 4 – Shake the Bag. Step 5 – Remove the part from the Bag and Wash. Step 6 – Let the parts Dry Completely
By the way, if you want to clean the Evolve Plus Xl battery 510 thread or the silicone jar, please use a cotton swab with Isopropyl Alcohol to clean off any reclaim in those parts.
Once you’ve secured the atomizer and the coil you’d want to do a bit of wiping especially around the threaded area and around the atomizer.
Then wipe down and dry completely before you use it.
Burn Off Residual ISO Fully assemble parts and engage device at full activation on MAX temperature level to burn off any residual ISO on remaining parts.
Load Smaller Material Common areas for clogging can be found in the Yocan Evolve Plus XL mouthpiece, QUAD coil cap, and the airflow part. To minimize clogging in these areas, be sure to limit your loads to smaller concentrate material sizes, no larger than a couple grains of rice.
Regularly clean Regular cleaning and maintenance is recommended to avoid clogging and extend the life of your Yocan device.