How-To-Guide: Yocan Evolve Plus XL Vaporizer manual

  • August 10 | Jeremy Lin

Yocan Evolve Plus XL User Manual

To charge your the Yocan Evolve Plus XL Vaporizer device before use. The Preparing process is very important.

To charge the battery use the micro USB that is included. Red light will
glow when it is charging. In around 3 hours the battery will be fully charged, the indicator shuts off.

How to turn on/off?

Please make sure your Yocan Evolve Plus XL device is charged.

The Yocan Evolve Plus XL power button is located at the middle part of the battery. It’s a oblong shaped (or elongated) button on the Yocan Evolve Plus XL battery.

By Clicking the fire button 5 times in a row within 2 seconds to turn it on. If you want to turn off the Yocan Evolve Plus XL, as same as turn on operation, just hit the fire button 5 times again.

How to load/reload the concentrate material?

Please remove the magnetic mouthpiece and unscrew the coil cap. Drop your concentrate material as center as the coil. Please don’t stab the heating element. Put the coil cap and mouthpiece back on. Press and hold the button and enjoy your vaping.

Reload the Concentrate Material

Repeat as desired. Twist the airflow control valve to adjust the airflow as desired.

After use, press power button another 5 times within 2 seconds to
power off.

How to extend Yocan Evolve Plus XL lifespan?

To extend the life and reliability of this product:

  1. Please finish all the product in the bowl to prevent concentrate seepage through the coil to the top of the battery.
  2. Use a cotton swab and alcohol to keep the top of the battery, bottom
    of the coil and the threads around the mouthpiece clean of concentrate.
  3. The coil and base can be soaked in alcohol and left to dry.

Auto-cut-off Protection:

Safety Cutoff function. If the power button is pressed continuously for more than 15 seconds, the light will flash 3 times and stop working. Release the power button and then press the power button to continue vaping.

Short-circuit: The light flashes 3 times.
Low battery: The light flashes 10 times and stops working.


Once the Yocan Evolve Plus XL Vaporizer is powered on you can begin the sterilization process. You can sterilize the coils by pressing and holding the power button for 5 seconds two or three times. Note: perform sterilization during the first time you receive your Yocan Evolve Plus XL Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
After sterilizing the coils, let the vaporizer rest and sit for about 2 – 3 minutes. After so, you can begin loading your select concentrates onto your Yocan Evolve Plus XL Vaporizer.


Loading the Yocan Evolve Plus XL Vaporizer
Detach the built-in concentrate chamber found at the bottom of the Yocan Evolve Plus XL Vaporizer. Simultaneously, prepare your dab tool so you can easily scoop your concentrates from the integrated concentrate chamber.
If it’s the first time you’re using your Yocan Evolve Plus XL Vaporizer, be sure to sanitize it first. Note: Follow steps for preparing the Yocan Evolve Plus XL Vaporizer.
Pull the mouthpiece upwards to expose the Yocan Quad Coils.
Move the coil caps counter clockwise to expose the quad coils. Pulling the mouthpiece from the magnetic connection reveals the coils that are covered with the coil cap.
Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the post located at the middle of the Yocan Quad Coils.
Return the coil cap by winding it clockwise. Note: make sure not to overtighten the threaded connection as it could damage it and cause it to be loose altogether.
Return the mouthpiece by sliding it back to the magnetic connection and assemble the Yocan Evolve Plus XL Vaporizer.


Vaping with the Yocan Evolve Plus XL Vaporizer
Ensure that your Yocan Evolve Plus XL Vaporizer is completely charged, suitably sterilized, and is loaded with concentrates before you begin your vaping session.
Next, ensure that the Yocan Evolve Plus XL Vaporizer is loaded and press your lips onto the mouthpiece and prepare to draw or inhale.
Press and hold the power button. When the Yocan Evolve Plus XL Vaporizer starts making vapors inhale from the mouthpiece and check the vapor production.
Repeat this process as necessary or as the concentrates are fully consumed.
Care and Maintenance of the Yocan Evolve Plus XL Vaporizer
The Yocan Evolve Plus XL Vaporizer was made with few parts which makes it easy to clean and to maintain. Likewise, having fewer parts to work with makes your vaporizer more robust and more durable. To keep your Yocan Evolve Plus XL Vaporizer clean and in good working condition, follow the steps below.

Tap the power button 5 times to power the Yocan Evolve Plus XL Vaporizer on. Five more clicks will turn the Yocan Evolve Plus XL Vaporizer off.
Turn the Yocan Evolve Plus XL Vaporizer upside down.
Conduct a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times. Doing so will melt any residue making the cleaning process easy.
Let the vaporizer cool down.
Dismantle the Yocan Evolve Plus XL Vaporizer by pulling the magnetic connections and by twisting the threaded connections counter clockwise.
Remove any liquid residue on the vaporizer using a dry paper towel and proceed with reassembling the Yocan Evolve Plus XL Vaporizer.

Comments are closed.